There are many types of stands for model boats. some are meant to look good to display static models, while others are entirely utilitarian for hauling rc boats between one's vehicle and the water's edge.. If the boat stand is for a hydroplane model, the trimming is usually easier since the hydro has a flat bottom. the trimming usually consists of cutting the width of the foam base to match the sponson width at the bow and the transom width at the stern of the boat stand.. Carrera rc boat. comes with boat, stand, paperwork, and charger. this will need a good charger before being used. this does not come with batteries, sorry..
Boat stand in one of the photos of thro sail he is showing how to tune on a strap stand and the extra piece of foam allow the boat to be brought into the wind easier. mike. Wooden boat stands are also popular, but they typically require a bit more skill to create one that cradles the hull correctly. they usually employ cross pieces (perpendicular to the keel line) that are cut to conform to the hull bottom.. Fit exactly the traxxas spartan 4 x pvc pipe 50 cm 4 x pvc pipe 10 cm 4 x pvc pipe 4 cm 2 x pvc pipe 13,5 cm 8 x 90 degrees elbow 4 x t piece pvc glue and some foam..
0 comments:
Post a Comment