An appeal for bow rollers

WHEN I WALK AROUND our local marina I can hardly believe how many boats lack anchor rollers. What were the manufacturers thinking? Thirty footers and bigger, without any proper means of retrieving the anchor and its rode. Did they imagine their boats would never ever anchor, from choice or necessity?

In my humble opinion, no boat over 20 feet in length should be allowed to leave the factory without a proper anchor roller at the bow.

Anyone who has ever tried to weigh anchor by hand in a boat without a bow roller knows how awkward and difficult it is. Consequently, you’ll notice that all sorts of after-market rollers get bolted on by boat owners seeking to ease the pain of retrieving the anchor. Some of them look far too flimsy for the job. Some stick out from behind the forestay at an odd angle. Others have to be bolted on top of a bed of teak to bring them to the correct level. And they’re not cheap, either. A reasonably sized one that will house the anchor costs in the region of $200 with shipping. And then you have all the fun of fitting it yourself.

I was lucky enough to own a boat that was designed from the beginning to have an anchor roller. It was part of a simple bronze fitting that incorporated the bow chainplate, a bow roller, and the stemhead fitting to which the forestay attached. I blessed its little heart every time I weighed anchor, which I was able to do sitting down on deck behind it and bracing my feet in the anchor well.

In the days of my youth I used to be able to raise that way a 35-pound CQR on an all-chain 5/16-inch rode in 90 feet of water. But when I later bought a 27-foot Cape Dory with a built-in roller, my anchor weighed only 25 pounds and there was only 30 feet of 1/4-inch chain; the rest was nylon line. So I had it a lot easier and I was very grateful.

I can only imagine that unscrupulous boat manufacturers deliberately omit a bow roller in an effort to keep the selling price down a few bucks. It’s a wicked practice, like selling a new car without a horn, or without a spare tire. If I were in charge of the boat-manufacturing industry I would make it a federal crime to sell a boat without an anchor roller. But since they’re never likely to elect me to that position, the situation is unlikely to change unless we all start complaining to our representatives in Congress.

Never mind Obamacare for the moment. Never mind Trump and Isis and Iran and North Korea. Forget all that for now. Surprise your elected U.S. representative. Ask him or her to sponsor legislation about bow rollers. You never know. It might be such a refreshing change from the same-old, same-old, that Washington DC could catch fire with enthusiasm for compulsory bow rollers. And if that means some boat manufacturers will end up behind bars, so be it. They deserve it.

Today’s Thought

The law is the last result of human wisdom acting upon human experience for the benefit of the public.

—Samuel Johnson, Miscellanies

Tailpiece

“Did you know old Joe survived mustard gas and pepper spray?”

“No. How’s he doing?”

“Oh he’s a seasoned veteran now.”

(Drop by every Monday, Wednesday, Friday for a new Mainly about Boats column.)

Related Posts by Categories